EcoFlow 2kWh Power Kit
✓ Price Match Guarantee
✓ FREE Shipping on Most Orders Over $5000: In Stock Ready To Ship
✓ Questions? Talk to a EcoFlow Expert: 1-303-876-7654
Login for Exclusive Member Pricing.
Not a member? Create a Free Account.
Login for Exclusive Member Pricing.
Not a member? Create a Free Account.
The 2kWh Power Kit is the smallest complete Power Kit system, and the right starting point for a van conversion, a small camper, or a tiny home where space matters more than storage capacity.
Everything runs off one Power Hub, which packs an inverter-charger, two MPPT solar controllers, an MPPT battery charger and a DC-DC converter into a single wall-mounted box. Charge it from up to 4800W of solar, 3000W of shore power, 1000W from your vehicle's alternator on the move, or 1800W from an EcoFlow Smart Generator. Renewable Outdoors is an authorized EcoFlow dealer — call us at (303) 876-7654 and we'll help you spec the system properly before you order.
The Power Hub replaces a separate inverter, two solar charge controllers, a DC-DC converter and a battery charger — one unit, pre-wired, far less to install and troubleshoot.
Enough to run a rooftop air conditioner, a microwave, an induction hob or power tools — 120V pure sine wave, so sensitive electronics are safe.
Three solar inputs at 1600W each. Very few RV or cabin roofs can fit that much panel, which means the Hub will never be your bottleneck.
Up to 4800W solar, 3000W shore power, 1000W from the alternator while you drive, and 1800W from an EcoFlow Smart Generator.
One 2kWh LFP battery. The batteries heat themselves so they can still charge at temperatures down to −4°F.
Up to three batteries stack in parallel per Power Hub via the Terminal Busbar, and they hot-swap — so you can grow the bank without rebuilding the system.
The Prepared Kit adds the AC/DC Smart Distribution Panel and 1 × Battery Mounting Strap. The Independence Kit kit adds the Power Kit Console on top of that. Solar panels, shore power cabling and the Smart Generator are separate purchases — call us and we'll put the full list together for you.
All three kits contain the same Power Hub and the same batteries. What changes is how the power gets distributed and how you monitor it.
| Kit | What It Adds | Why Choose It |
|---|---|---|
| Get Set Kit | Power Hub, battery, cables and all mounting hardware | You already have a distribution panel, or you are wiring loads directly and are comfortable doing so |
| Prepared Kit | Adds the AC/DC Smart Distribution Panel and 1 × battery mounting strap | Breaker-protected circuits with per-circuit monitoring — the option most installs actually want |
| Independence Kit | Adds the Power Kit Console wall display | See and control the whole system from a panel on the wall rather than from your phone |
If you're replacing an existing RV electrical system, the distribution panel usually pays for itself in install time alone. Call us at (303) 876-7654 and describe your setup — we'll tell you honestly which kit you need.
| Total Battery Capacity | 2,048Wh (1 × 2kWh LFP Battery) |
| System Voltage | 48V |
| Inverter Output | 3600W continuous, pure sine wave, 120V 60Hz |
| Surge Output | 7200W for 100ms |
| AC (Shore Power) Input | 100–120V 50/60Hz, up to 3000W / 30A |
| Solar Input | Up to 4800W total across three inputs (1600W each) |
| Solar Voltage Window | 13–60V, 30A per input |
| Alternator Charging | Up to 1000W |
| Smart Generator Input | Up to 1800W |
| Battery Port | 40–60V, 100A — up to 3 LFP batteries per Power Hub |
| Integrated Components | Two MPPT solar charge controllers, MPPT battery charger, DC-DC step-down converter, inverter-charger |
| Power Hub Dimensions | 18.9" × 5.5" × 11.8" (480 × 140 × 300mm) |
| Power Hub Weight | Approx. 30.9 lbs (14 kg) |
| Operating Temperature | −13°F to 140°F (−25°C to 60°C) |
| Warranty | 5 years on components (cables and accessories: 12 months) |
| Battery Capacity | 2048Wh per battery (40Ah at 48V) |
| Cell Chemistry | LFP (LiFePO4) |
| Cycle Life | Up to 3500 cycles at 80% depth of discharge — roughly 10 years of use |
| Cold-Weather Charging | Auto-heating allows charging down to −4°F |
| Expansion | Stack up to 3 batteries in parallel per Power Hub using the Terminal Busbar |
| Installation | Hardwired or plug-and-play; wall clamp, mounting bracket and strap included |
| Hot Swap | Supported |
| Warranty | 5 years |
EcoFlow covers the Power Hub, batteries, distribution panel and console for five years.
Found it cheaper elsewhere? Call us at (303) 876-7654 before you buy.
Genuine EcoFlow hardware with full manufacturer support behind it.